WHITESIDE MACHINE 5701A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16" BORE X .070 KERF

WHITESIDE MACHINE 5701A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16" BORE X .070 KERF Reviews

Other Picture

WHITESIDE MACHINE 5701A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16" BORE X .070 KERF Feature

• AMERICAN MADE FOR THE AMERICAN WOODWORKER
• MADE FROM SOLID ALLOY STEEL
• PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
• MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
• USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE

WHITESIDE MACHINE 5701A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16" BORE X .070 KERF

Visit Store Now !!

Detail Products

Detail Reviews

Jul 20, 2011 02:55:06

WHITESIDE MACHINE 6710A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 1/4" (.250) KERF

WHITESIDE MACHINE 6710A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 1/4" (.250) KERF Reviews

Other Picture

WHITESIDE MACHINE 6710A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 1/4" (.250) KERF Feature

• AMERICAN MADE FOR THE AMERICAN WOODWORKER
• MADE FROM SOLID ALLOY STEEL
• PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
• MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
• USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE

WHITESIDE MACHINE 6710A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 1/4" (.250) KERF

Visit Store Now !!

Detail Products

• PART #A210B 1/2 SHANK SLOTTING CUTTER ARBOR W/B5 BEARING 5/16" SPINDLE DIA X 7/8" ARBOR LENGTH
• WHITESIDE MACHINE 6705A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 1/8" (.125) KERF
• PART #A220B 1/2 SHANK SLOTTING CUTTER ARBOR W/B5 BEARING 5/16" SPINDLE DIA X 7/8" ARBOR LENGTH
• Whiteside - WSRU4900 - 3/8" Standard 2 Flute Upcut Spiral Bit
• Whiteside - WSD10-55 1/2" Dovetail Bits

Detail Reviews

Jul 06, 2011 08:14:03

WHITESIDE MACHINE 6712A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 9/32" (.281) KERF

WHITESIDE MACHINE 6712A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 9/32" (.281) KERF Reviews

Other Picture

WHITESIDE MACHINE 6712A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 9/32" (.281) KERF Feature

• AMERICAN MADE FOR THE AMERICAN WOODWORKER
• MADE FROM SOLID ALLOY STEEL
• PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
• MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
• USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE

WHITESIDE MACHINE 6712A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 9/32" (.281) KERF

Visit Store Now !!

Detail Products

Detail Reviews

Jun 30, 2011 04:39:03

WHITESIDE MACHINE 6700A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16' BORE X 1/16 (.062) KERF

WHITESIDE MACHINE 6700A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16' BORE X 1/16 (.062) KERF Reviews

Other Picture

WHITESIDE MACHINE 6700A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16' BORE X 1/16 (.062) KERF Feature

• AMERICAN MADE FOR THE AMERICAN WOODWORKER
• MADE FROM SOLID ALLOY STEEL
• PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
• MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
• USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE

WHITESIDE MACHINE 6700A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16' BORE X 1/16 (.062) KERF

Visit Store Now !!

Detail Products

• PART #A200B 1/4 SHANK SLOTTING CUTTER ARBOR W/B5 BEARING 5/16" SPINDLE DIA X 7/8" ARBOR LENGTH
• PART #A210B 1/2 SHANK SLOTTING CUTTER ARBOR W/B5 BEARING 5/16" SPINDLE DIA X 7/8" ARBOR LENGTH
• 3/4'' X 100 ft Plastic T-Molding Black
• WHITESIDE MACHINE 6702A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X .080 KERF
• WHITESIDE MACHINE 6705A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 1/8" (.125) KERF

Detail Reviews

Jun 22, 2011 18:49:12

23-215B, 3-Wing Slot Cutter With 1/2" Arbor, 5.5mm Kerf With 5/16" Bore

23-215B, 3-Wing Slot Cutter With 1/2" Arbor, 5.5mm Kerf With 5/16" Bore Reviews

Other Picture

23-215B, 3-Wing Slot Cutter With 1/2" Arbor, 5.5mm Kerf With 5/16" Bore Feature

• 5/16" bore x 1-7/8" cutter diameter x 5.5mm kerf
• 3-wing anti-kickback design for safe router operation
• Precision machined from fatigue-proof steel for extra strength
• Black oxide coating prevents rust and makes cleanup a snap
• With 1/2" shank arbor and 5/16" x 7/8" diameter bearing

Our 3-wing micro-grain carbide slot cutters are designed with an anti-kickback shoulder that prevents your bit from 'biting-back'. Use this cutter to make rabbets or grooves, slot for spines or biscuits, mill tongue & groove stock or rout grooves for T-molding. This cutter comes with a 1/2" shank arbor and a 5/16" x 7/8" bearing to give you a 1/2" depth of cut.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 21, 2011 22:02:05

WHITESIDE MACHINE 6709A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 3/16" (.187) KERF

WHITESIDE MACHINE 6709A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 3/16" (.187) KERF Reviews

Other Picture

WHITESIDE MACHINE 6709A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 3/16" (.187) KERF Feature

• AMERICAN MADE FOR THE AMERICAN WOODWORKER
• MADE FROM SOLID ALLOY STEEL
• PRECISION GROUND FOR PROPER BALANCE AT HIGH RPMS
• MADE WITH THICK CARBIDE FOR EXTRA SHARPENINGS
• USES THE HIGHEST QUALITY AMERICAN MADE MICROGRAIN CARBIDE

WHITESIDE MACHINE 6709A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 3/16" (.187) KERF

Visit Store Now !!

Detail Products

• PART #A210B 1/2 SHANK SLOTTING CUTTER ARBOR W/B5 BEARING 5/16" SPINDLE DIA X 7/8" ARBOR LENGTH
• WHITESIDE MACHINE 6710A CARBIDE-TIP 3-WING SLOTTER 1-7/8 DIA X 5/16 BORE X 1/4" (.250) KERF
• Norton 3X Abrasive Sheet, Paper Backing, Aluminum Oxide, Grit 220 (Pack of 20)

Detail Reviews

Jun 06, 2011 12:31:09

BOSCH 84623M 1/4-Inch Shank Tongue & Groove Router Bit 3-Wing With Bearing

BOSCH 84623M 1/4-Inch Shank Tongue & Groove Router Bit 3-Wing With Bearing Reviews

Other Picture

BOSCH 84623M 1/4-Inch Shank Tongue & Groove Router Bit 3-Wing With Bearing Feature

• Recommended for use with a routing table
• All bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router

Bosch 84623M Tongue & Groove Bit, 3-wing, with bearing

Visit Store Now !!

Detail Products

• General Tools 888 1/4-Inch to 1/2-Inch Dowel Center Transfer Plugs
• BOSCH RA1181 Benchtop Router Table
• General Tools S838 6 Piece 3/16-Inch to 1/2-Inch Drill Stop Assortment
• OEM 25025 26-Blade Master Feeler Gauge
• Robert Larson 800-1800 Honing Guide

Detail Reviews

May 31, 2011 09:23:04

23-1564B, 3-Wing Slot Cutter With 1/2" Arbor, 15/64" Kerf With 5/16" Bore

23-1564B, 3-Wing Slot Cutter With 1/2" Arbor, 15/64" Kerf With 5/16" Bore Reviews

Other Picture

23-1564B, 3-Wing Slot Cutter With 1/2" Arbor, 15/64" Kerf With 5/16" Bore Feature

• 5/16" bore x 1-7/8" cutter diameter x 15/64" kerf
• 3-wing anti-kickback design for safe router operation
• Precision machined from fatigue-proof steel for extra strength
• Black oxide coating prevents rust and makes cleanup a snap
• With 1/2" shank arbor and 5/16" x 7/8" diameter bearing

Our 3-wing micro-grain carbide slot cutters are designed with an anti-kickback shoulder that prevents your bit from 'biting-back'. Use this cutter to make rabbets or grooves, slot for spines or biscuits, mill tongue & groove stock or rout grooves for T-molding. This cutter comes with a 1/2" shank arbor and a 5/16" x 7/8" bearing to give you a 1/2" depth of cut.

Visit Store Now !!

Detail Products

Detail Reviews

May 02, 2011 12:28:06

23-140A, 3-Wing Slot Cutter With 1/4" Arbor, 1/4" Kerf With 5/16" Bore

23-140A, 3-Wing Slot Cutter With 1/4" Arbor, 1/4" Kerf With 5/16" Bore Reviews

Other Picture

23-140A, 3-Wing Slot Cutter With 1/4" Arbor, 1/4" Kerf With 5/16" Bore Feature

• 5/16" bore x 1-7/8" cutter diameter x 1/4" kerf
• 3-wing anti-kickback design for safe router operation
• Precision machined from fatigue-proof steel for extra strength
• Black oxide coating prevents rust and makes cleanup a snap
• With 1/4" shank arbor and 5/16" x 7/8" diameter bearing

Our 3-wing micro-grain carbide slot cutters are designed with an anti-kickback shoulder that prevents your bit from 'biting-back'. Use this cutter to make rabbets or grooves, slot for spines or biscuits, mill tongue & groove stock or rout grooves for T-molding. This cutter comes with a 1/4" shank arbor and a 5/16" x 7/8" bearing to give you a 1/2" depth of cut.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 19, 2011 08:10:04

BOSCH 84624M 1/2-Inch Shank Tongue & Groove Router Bit 3-Wing With Bearing

BOSCH 84624M 1/2-Inch Shank Tongue & Groove Router Bit 3-Wing With Bearing Reviews

Other Picture

BOSCH 84624M 1/2-Inch Shank Tongue & Groove Router Bit 3-Wing With Bearing Feature

• Carbide tipped tongue and groove bits are designed to cut tongue and grooves on 1/2- through 3/4-inch thick material
• All bits must be inserted in the full length of the collet--be sure to use only router bits and accessories specifically designed for your router
• Recommended for use with a routing table
• To cut the tongue, use the complete assembly; to cut the groove, remove one slotting cutter
• 2-1/2-inch overall length; ships at 6.4-ounces

Micrograin bits designed to cut tongue and grooves on 1/2" through 3/4" thick material. To cut the tongue, use the complete assembly; to cut the groove, remove one slotting cutter. 1/2" decorative cut depth. Recommended for use with a router table.

Visit Store Now !!

Detail Products

• Bosch RA1125 7-Piece Router Template Guide Set
• BOSCH RA1181 Benchtop Router Table
• DEWALT DW7351 Folding Table for DW735 Planer

Detail Reviews

Mar 12, 2011 12:58:04

23-532B, 3-Wing Slot Cutter With 1/2" Arbor, 5/32" Kerf With 5/16" Bore

23-532B, 3-Wing Slot Cutter With 1/2" Arbor, 5/32" Kerf With 5/16" Bore Reviews

Other Picture

23-532B, 3-Wing Slot Cutter With 1/2" Arbor, 5/32" Kerf With 5/16" Bore Feature

• 5/16" bore x 1-7/8" cutter diameter x 5/32" kerf
• 3-wing anti-kickback design for safe router operation
• Precision machined from fatigue-proof steel for extra strength
• Black oxide coating prevents rust and makes cleanup a snap
• With 1/2" shank arbor and 5/16" x 7/8" diameter bearing

Our 3-wing micro-grain carbide slot cutters are designed with an anti-kickback shoulder that prevents your bit from 'biting-back'. Use this cutter to make rabbets or grooves, slot for spines or biscuits, mill tongue & groove stock or rout grooves for T-molding. This cutter comes with a 1/2" shank arbor and a 5/16" x 7/8" bearing to give you a 1/2" depth of cut.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 26, 2011 15:28:07